How To Set Default Units In Solidworks 2017

Changing units in theSOLIDWORKSuser interface could non be simpler. Go to Tools>Options>Document Backdrop>Units to change the units that are being used inside the SOLIDWORKS blueprint environment. At that place is also the units' popup card in the lesser right-mitt corner of the SOLIDWORKS screen. Irresolute units within theSOLIDWORKS Simulation environment is a niggling more involved but even so simple.

SOLIDWORKS Simulation Units can be changed in three ways:

For all new SOLIDWORKS Simulation studies created after changing the Default Options units
In a SOLIDWORKS Simulation feature
In an individual Simulation plot

Changing the Units in the Default Options

There is merely i fashion to become to the SOLIDWORKS Simulation Default Options; click Simulation>Options>Default Options>Units. From here cull between the SI, English, and Metric unit types. At that place is also the option to customize units fifty-fifty farther by clicking on the drib-downward options adjacent to Length/Displacement, Temperature, Angular velocity, and Force per unit area/Stress. Each unit blazon has its specific customizable units drop-down bill of fare that can be changed while in this carte.

Pathway to change units in SOLIDWORKS Simulation Default Options

Also within the Default Options tab is the Color Chart. This chart allows us to ready a default number format to Scientific, Floating, and General.

Color Chart Number format location in the SOLIDWORKS Simulation Default Options

The differences betwixt the three Number formats tin can be seen below.

Scientific Numbering Format – Replaces part of the number with an exponential notation
Floating Numbering Format – This is a single-precision floating-betoken format
General Numbering Format – Rounds numbers to the closest chosen decimal identify

Different number of format options in SOLIDWORKS Simulation plots

Dissimilar number of format options in SOLIDWORKS Simulation plots

Changing units in a SOLIDWORKS Simulation feature

The units of some features in SOLIDWORKS Simulation can be changed individually. For example, if you apply a force load to your simulation yous can click on the drop-downwardly bill of fare side by side to the ruler icon where you can choose from SI, English, or Metric units. This is very convenient if you take a force input in SI units only y'all want to see the force load in English language units. All yous need to practice is enter the units when the feature is set to SI, and so switch to English and SOLIDWORKS Simulation will convert the SI units to English just like that.

Changing the units of an external load in a SOLIDWORKS Simulation feature

Irresolute unit Simulation plots

SOLIDWORKS Simulation allows us to change units used in the simulation for each result plot like in the Stress plot instance below. To open up a plot right click on the correct plot in the "Results" folder so click on the "Edit Definition" option. Click on the 2d drop-down card in the Display section of the Stress plot. Here in that location are 5 unit options to choose from: pascal, pounds per inch square, kilograms-forcefulness per centimeter square, megapascals, and kilo-pound per inch square.

To change the unit format in a single result plot go to the "Chart Options" tab under the "Position/Format" section and click on the driblet-down indicated in the screenshot below. The decimal places shown on the screenshot below can also be increased or decreased in this department.

Changing the units in a SOLIDWORKS Simulation results plot